123.hp.com/oj3830

HP Officejet 3830 Printer Setup

123-HP-Officejet-Printer

123.hp.com/oj3830

HP Officejet is a series of printers designed specifically for home users and to meet the needs of small businesses. In addition to the different features, this single printer can also print, scan and copy.

123 HP Officejet 3830 Printer setup

Identify and download the respective driver of your HP printer models (123.hp.com/setup Envy, Officejet,Officejet Pro,Dekjet,Laserjet). Read step-by-step instructions on setup and installing the HP printer via Wireless or USB printer links. To get quick and instant support, call toll-free number 1-866-309-6188.

How to Setup HP Officejet 3830 Printers

Step 1: Remove package contents

Step 2: Connect to the power cord

Step 3: Load paper in the input tray

Step 4 : Install the ink cartridges

Step 5 : Align the ink cartridges

Step 6 : Installation of driver software

Printer Setup and Installation Guide of HP Officejet 3830

The Windows 10 operating system is supported by the HP Officejet 3830 Printer. Search and find the best HP Printer software and driver on the same website.

In case of problems with your HP printer while running Windows 10, use the HP Print and Scan Doctor tool to analyze and fix the problem.

Step 1: Remove package contents

  1. Place it on a flat and stable counter after receipt of the shipment. Remove the materials of the package.
  2. The accessories in the box include the power cable, USB cable, driver CD, user guide and ink cartridges.
  3. The printer is taken off the box and placed on the counter.
  4. Remove all the tapes on the device. This prevents the printer components from moving during shipping.

Step 2: Connect to the power cord

  1. Connect the power cord. One end is connected to the back of the printer and the other end is connected to the wall power plug.
  2. This connection is directly made without interference with the voltage stabilizer or extension cord The printer is switched on automatically. 
  3. The basic information, such as the language or interface, location, date and time zone, is provided on the control panel.

Step 3: Load paper in the input tray

  1. Extend the input and output tray. If tapes are stuck on it, they must be removed.
  2. Open the input tray and remove the tapes on the markers for paper width and paper length.
  3. These are then extended to their maximum capacity. Then a new pack of authentic HP paper is fanned and placed on the input tray.
  4. Drag the markers to hold the paper tight, but not too tight. When done, close the tray.

Step 4 : Install the ink cartridges

  1. Two cartridge system operates on Envy printers. A black and three-colored cartridge with cyan, magenta and yellow.
  2. Remove the cartridge packaging. Open the access door of the cartridge and locate the carriage.
  3. Remove the protective tape under the cartridge that secures the points of contact & print head. Place the cartridge in the corresponding color slot and lock it into position with the cartridge lock.

Step 5 : Align the ink cartridges

  1. This step is taken to ensure that the cartridge does not print misspelled documents.
  2. Alignment on the scanner is done. Remove the protective sheet on the glass of the scanner.
  3. Clean the glass and place the front of the alignment sheet.
  4. Take care to ensure that the sheet is placed on the side of the scanner glass according to alignment marks.
  5. Click Ok and wait until the printer aligns.

Step 6 : Installation of driver software

  1. The driver software is the most important operating printer software because it serves as the connection between the printer and the computer.
  2. You can download this from the link on our website. Click on the link and on open windows, enter your printer model and choose the operating system of your computer.
  3. Following on-screen instructions, install the software after downloading. Choose the network connectivity mode during this process.