123.hp.com/envy4512

HP Envy 4512 Printer Setup

123 hp envy printer

123.hp.com/envy4512

HP Envy 4512 is inexpensive but has very expensive printer specifications. Compact in size, wireless networking and automated duplex printing are supported. It has functionality for printing, copying and scanning. You can use envy 4512 mobile printing with HP ePrint technology. You can download the HP printer driver from 123.hp.com/setup 4512.

123 HP Envy 4512 Printer Setup

HP Envy 4512 unboxing for installation

Pull out the pack for your 123 HP Envy 4512 printer. To trigger the printer, connect the power cord firm to the power socket. To power up the printer, press and hold the Home button on the printer screen. You must install your printer setup on your personal device, on the other hand. This may be your clever computer or intelligent devices. The 123.hp.com/setup 4512 printer driver can be downloaded and installed on your computer.

You can easily access your printer using your driver software and perform all printer functions from your computer or from anywhere via smart devices. Get your printer fixed to perform extraordinary print setup functions.

Set up your new HP Envy 4512 Printer

Now see how to fix the printer using the configuration manual. The easiest way to fix the printer and perform printing techniques is to fix the manual in case you can not follow the manual, use the following steps and begin.

  • Switching on your printer for the first time will make some noise from your printer. 
  • Now that your printer is ready to use, use the arrow keys to perform the functions. 
  • Start the setup by entering the region of the country and the time. 
  • Once you have completed all your initialization, you can continue. 
  • But you have to install the ink cartridges before you can start printing. 
  • Insert the cartridge and push it until the corner snaps. 
  • To install it in a wireless network, you must download the software from 123.hp.com/setup 4512. 
  • At the same time, you can install the setup using your CD driver. 
  • Once the entire settings are completed, save and close the tab.

HP Envy 4512 Wireless setup of the printer

How do I install Envy Driver Software?

  • You need to download the driver from 123.hp.com/setup 4512 to install the printer driver software on your computer. 
  • You now need to install and install the system. 
  • Run your computer’s setup file. 
  • Install the driver and perform printer access.

You can easily enable the wireless connection after you have installed the driver on your computer. Then connect your computer to a wireless router from the wireless connection tab. Now install the installation and perform actions to help you print documents wirelessly.

How to connect to a wireless network?

HP Printers have been launched recently with a wireless system. This option can be used to connect and share documents on the go. You need to install the driver setup in order to connect your wireless printer to your wireless router and only then can you connect your printer to a wireless connection.

HP Envy 4512 Wireless Printer Troubleshooting

If you have a problem with your network connection. You can view network connections or print a test page and follow the instructions to resolve the problem. HP envy 4512 printer manuals and drivers can be obtained from 123.hp.com/envy4512

Connecting Wireless Printer to Windows PC

  • Press the Start button on your desktop screen. 
  • Find the “Add Printer” option in the search box. 
  • A message appears to know what type of printer you want to install. 
  • Choose the wireless network. 
  • Click the “Use existing port” option and click on the next option. 
  • If your existing connection is connected via a USB connection, select the Add a Local Printer option. 
  • Select your name from the search results for your printer. 
  • Click on the next option now. 
  • A printer installation tab will be provided to you by the printer driver. 
  • Enter the name of your printer as 123 HP on the Windows Update option.

Connect HP Envy to smart devices

  • Select your device network. Hit the Wireless Wizard Setup. 
  • Enter the name and passphrase of the SSID if requested. 
  • The printer is immediately connected to the wireless network. 
  • Print a test page for a clear and perfect network connection.

Publishing a report on wireless testing

  • Click on the 123 HP Envy 4512 printer screen of the wireless icon. 
  • select the settings. By scrolling down,
  • Use the arrow keys to display the options. 
  • Choose the network configuration to print the wireless test report from the list of options.

The Envy 4512 Printer can not keep the wireless connection. If your printer is connected successfully and your network connection is still lost, it is necessary to check the configuration of the printer. 

Follow the instructions given to set your printer back.

1.Confirm the connection of 123 HP Envy 4512 Printer to a wireless router.

If your printer is connected to a wireless network, then your printers are blinking in the wireless light. If the light does not blink, then proceed with a test page and print it to see your printer’s status.

2.Comparing the printer’s IP address with the test page address:

Look for the IP address from your wireless connection test page. The IP address of your printer should start with 169.254.xxx.xx. Check the printer IP address and the test page.

3.Check your network ID and the name of the network:

Check the network name. Whether the network to which the printer has been connected differs from the network on your printer. Disconnect and reconnect the printer. Under the wireless segment on the printer.

4.HP Envy AirPrint Configuration:

Do you want to connect your iPhone or iPad with 123 HP Envy Printer 4512? You have to configure the airprint for that. Configure your airprint, select your printer and print the apple device held by your hand.

HP Cloud Print Configuration:

To connect a printer to your Google Cloud Print, you need some requirements.

Google chrome browser 

  • A google account 
  • A network printer connected to the same network with google cloud print enabled.

HP ePrint Service: 

This service can help HP users connect the printer to an installation and perform functionality that will help the user easily print the document wherever they are.

Windows 10 support for HP Envy: 

Make sure your own personal computer or device is updated to windows 10 OS. Now the drivers software from 123.hp.com/setup 4512 must be downloaded and installed, making sure the software is fit for windows 10.

Printing of documents using 123.hp.com/envy4512

Printing is important to HP Printers. You can print good quality documents using envy 4512. You can even print images from these printers. You can perform these operations to print a document or image.

  • Install and run your printer setup, 
  • power up your printer with the power cord. 
  • Open the cover lid of the printer. Place the document. 
  • Make sure you put it in the right corner. 
  • Click the print option on the control panel. 
  • Choose the number of options. 
  • Select the option of black or color and click on print. 
  • Finally, select the option start print.

Copy & scan documents for HP Envy 4512 Printer

Your documents can be easily copied and scanned on your Envy 4512 printer. You can do the same thing as printing documents. To copy and scan the document, place the document in the glass scanner. Follow the steps for copying and scanning. You can download HP Envy 4512 printer driver from 123.hp.com/envy4512

How to copy and scan a document?

  • The HP Envy is an all-in – one printer with many functions. 
  • To copy and scan your document to your device. 
  • Place a document on the glass scanner of the printer. 
  • Make sure you put the document in the right corner. 
  • Close the lid. 
  • Hit the scan tab with the printer control panel. 
  • The printer copies the document first. 
  • The document is scanned secondly. 
  • If a two-sided document is to be scanned, select the Duplexer method. 
  • Now when the printer scans on one side. 
  • Place the other side of the scanning document. 
  • Finally, choose the save place to save the document.

HP Envy 4512 troubleshooting issues

Problem solving is nothing more than solving problems on your printer. In other words, on your printer, your problem is solved. To do this, you can directly click on your printer’s problem solving option. In case of problems on the printer, the printer can perform its installed troubleshooting techniques.

How to fix issues of Paper Jam?

Paper Jam is one of the common problems that can occur during printing. To resolve this problem, you should first know where the jam occurred. Steps to solve the problem of paper jam.

  • If you have a paper stuck in your printer.
  • Locate the paper jam on the control panel of your printer.
  • Once the paper jam is found,
  • Open the door to remove the jam from the paper.
  • Remove the jammed area of the paper.
  • Ensure that there is no remaining in the area.
  • Close the door of access and restart the printer.

How to fix problems with the cartridge?

An important aspect of each printer is printing technology. In order to print documents with good quality, you have to install cartridges. There are a number of issues with ink cartridges. Follow these steps to resolve cartridge problems.

  • To resolve the problem of cartridges,
  • Use the troubleshooting option in your printer control panel.
  • Now follow the problem with the troubleshooting option.
  • Open the access door to the cartridge.
  • Remove the cartridge and wipe with a clean cloth the cartridge.
  • fix the cartridge back in the carriage.
  • Close the access door. 
  • restart your printer.